Bộ lập trình S7-300 CPU 314 Siemens 6ES7314-1AG14-0AB0

Nội dung bài viết:

Tóm tắt thông số kỹ thuật 6ES7314-1AG14-0AB0
Phụ kiện (tùy chọn) cho 6ES7314-1AG14-0AB0
Chi tiết thông số kỹ thuật 6ES7314-1AG14-0AB0

Tóm tắt thông số kỹ thuật 6ES7314-1AG14-0AB0

Mã sản phẩm	6ES7314-1AG14-0AB0
Dòng sản phẩm	SIMATIC S7-300, CPU 314
Hãng sản xuất	SIEMENS
Dung lượng bộ nhớ	128 KB
Nguồn cung cấp	24 V DC (19.2-28.8V DC)
Kích thước (RxCxS)	40x125x130 mm
Trọng lượng	280 g

Phụ kiện (tùy chọn) cho 6ES7314-1AG14-0AB0

6ES7953-8LF31-0AA0: SIMATIC S7, Micro Memory Card cho S7-300/C7/ET 200, 3, 3V Nflash, 64 KB
6ES7953-8LG31-0AA0: SIMATIC S7, Micro Memory Card cho S7-300/C7/ET 200, 3, 3V Nflash, 128 KB
6ES7953-8LJ31-0AA0: SIMATIC S7, Micro Memory Card cho S7-300/C7/ET 200, 3, 3V Nflash, 512 KB
6ES7953-8LL31-0AA0: SIMATIC S7, Micro Memory Card cho S7-300/C7/ET 200, 3, 3V Nflash, 2 MB
6ES7953-8LP31-0AA0: SIMATIC S7, Micro Memory Card cho S7-300/C7/ET 200, 3, 3V Nflash, 8 MB

Chi tiết thông số kỹ thuật 6ES7314-1AG14-0AB0

General information
Engineering with
● Programming package	STEP 7 V5.5+ SP1 or higher or STEP 7 V5.2 + SP1 or higher with HSP 218
Supply voltage
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
external protection for power supply lines (recommendation)	2 A min.
Mains buffering
● Mains/voltage failure stored energy time	5 ms
● Repeat rate, min.	1 s
Input current
Current consumption (rated value)	650 mA
Current consumption (in no-load operation), typ.	140 mA
Inrush current, typ.	3.5 A
I²t	1 A²·s
Power loss
Power loss, typ.	4 W
Memory
Work memory
● integrated	128 kbyte
● expandable	No
Load memory
● Plug-in (MMC)	Yes
● Plug-in (MMC), max.	8 Mbyte
● Data management on MMC (after last programming), min.	10 y
Backup
● present	Yes; Guaranteed by MMC (maintenance-free)
● without battery	Yes; Program and data
CPU processing times
for bit operations, typ.	0.06 µs
for word operations, typ.	0.12 µs
for fixed point arithmetic, typ.	0.16 µs
for floating point arithmetic, typ.	0.59 µs
CPU-blocks
Number of blocks (total)	1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
● Number, max.	1 024; Number range: 1 to 16000
● Size, max.	64 kbyte
FB
● Number, max.	1 024; Number range: 0 to 7999
● Size, max.	64 kbyte
FC
● Number, max.	1 024; Number range: 0 to 7999
● Size, max.	64 kbyte
OB
● Number, max.	see instruction list
● Size, max.	64 kbyte
● Number of free cycle OBs	1; OB 1
● Number of time alarm OBs	1; OB 10
● Number of delay alarm OBs	2; OB 20, 21
● Number of cyclic interrupt OBs	4; OB 32, 33, 34, 35
● Number of process alarm OBs	1; OB 40
● Number of startup OBs	1; OB 100
● Number of asynchronous error OBs	4; OB 80, 82, 85, 87
● Number of synchronous error OBs	2; OB 121, 122
Nesting depth
● per priority class	16
● additional within an error OB	4
Counters, timers and their retentivity
S7 counter
● Number	256
Retentivity
— adjustable	Yes
— lower limit	0
— upper limit	255
— preset	Z 0 to Z 7
Counting range
— lower limit	0
— upper limit	999
IEC counter
● present	Yes
● Type	SFB
● Number	Unlimited (limited only by RAM capacity)
S7 times
● Number	256
Retentivity
— adjustable	Yes
— lower limit	0
— upper limit	255
— preset	No retentivity
Time range
— lower limit	10 ms
— upper limit	9 990 s
IEC timer
● present	Yes
● Type	SFB
● Number	Unlimited (limited only by RAM capacity)
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	64 kbyte
Flag
● Size, max.	256 byte
● Retentivity available	Yes; MB 0 to MB 255
● Retentivity preset	MB 0 to MB 15
● Number of clock memories	8; 1 memory byte
Data blocks
● Retentivity adjustable	Yes; via non-retain property on DB
● Retentivity preset	Yes
Local data
● per priority class, max.	32 kbyte; Max. 2 KB per block
Address area
I/O address area
● Inputs	1 024 byte
● Outputs	1 024 byte
Process image
● Inputs	1 024 byte
● Outputs	1 024 byte
● Inputs, adjustable	1 024 byte
● Outputs, adjustable	1 024 byte
● Inputs, default	128 byte
● Outputs, default	128 byte
Digital channels
● Inputs	1 024
— of which central	1 024
● Outputs	1 024
— of which central	1 024
Analog channels
● Inputs	256
— of which central	256
● Outputs	256
— of which central	256
Hardware configuration
Number of expansion units, max.	3
Number of DP masters
● integrated	0
● via CP	4
Number of operable FMs and CPs (recommended)
● FM	8
● CP, PtP	8
● CP, LAN	10
Rack
● Racks, max.	4
● Modules per rack, max.	8
Time of day
Clock
● Hardware clock (real-time)	Yes
● retentive and synchronizable	Yes
● Backup time	6 wk; At 40 °C ambient temperature
● Deviation per day, max.	10 s; Typ.: 2 s
● Behavior of the clock following POWER-ON	Clock continues running after POWER OFF
● Behavior of the clock following expiry of backup period	Clock continues to run with the time at which the power failure occurred
Operating hours counter
● Number	1
● Range of values	0 to 2^31 hours (when using SFC 101)
● Granularity	1 h
● retentive	Yes; Must be restarted at each restart
Clock synchronization
● supported	Yes
● to MPI, master	Yes
● to MPI, slave	Yes
● in AS, master	Yes
● in AS, slave	No
Digital inputs
Number of digital inputs	0
Digital outputs
Number of digital outputs	0
Analog inputs
Number of analog inputs	0
Analog outputs
Number of analog outputs	0
Interfaces
Number of industrial Ethernet interfaces	0
Number of PROFINET interfaces	0
Number of RS 485 interfaces	1
Number of RS 422 interfaces	0
1. Interface
Interface type	Integrated RS 485 interface
Isolated	No
Interface types
● RS 485	Yes
● Output current of the interface, max.	200 mA
Protocols
● MPI	Yes
● PROFIBUS DP master	No
● PROFIBUS DP slave	No
● Point-to-point connection	No
MPI
● Transmission rate, max.	187.5 kbit/s
Services
— PG/OP communication	Yes
— Routing	No
— Global data communication	Yes
— S7 basic communication	Yes
— S7 communication	Yes; Only server, configured on one side
— S7 communication, as client	No
— S7 communication, as server	Yes
Communication functions
PG/OP communication	Yes
Data record routing	No
Global data communication
● supported	Yes
● Number of GD loops, max.	8
● Number of GD packets, max.	8
● Number of GD packets, transmitter, max.	8
● Number of GD packets, receiver, max.	8
● Size of GD packets, max.	22 byte
● Size of GD packet (of which consistent), max.	22 byte
S7 basic communication
● supported	Yes
● User data per job, max.	76 byte
● User data per job (of which consistent), max.	76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
● supported	Yes
● as server	Yes
● as client	Yes; Via CP and loadable FB
● User data per job, max.	180 byte; With PUT/GET
● User data per job (of which consistent), max.	240 byte; as server
S5 compatible communication
● supported	Yes; via CP and loadable FC
Number of connections
● overall	12
● usable for PG communication	11
— reserved for PG communication	1
— adjustable for PG communication, min.	1
— adjustable for PG communication, max.	11
● usable for OP communication	11
— reserved for OP communication	1
— adjustable for OP communication, min.	1
— adjustable for OP communication, max.	11
● usable for S7 basic communication	8
— reserved for S7 basic communication	0
— adjustable for S7 basic communication, min.	0
— adjustable for S7 basic communication, max.	8
S7 message functions
Number of login stations for message functions, max.	12; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages	Yes
simultaneously active Alarm-S blocks, max.	300
Test commissioning functions
Status block	Yes; Up to 2 simultaneously
Single step	Yes
Number of breakpoints	4
Status/control
● Status/control variable	Yes
● Variables	Inputs, outputs, memory bits, DB, times, counters
● Number of variables, max.	30
— of which status variables, max.	30
— of which control variables, max.	14
Forcing
● Forcing	Yes
● Forcing, variables	Inputs, outputs
● Number of variables, max.	10
Diagnostic buffer
● present	Yes
● Number of entries, max.	500
— adjustable	No
— of which powerfail-proof	100; Only the last 100 entries are retained
● Number of entries readable in RUN, max.	499
— adjustable	Yes; From 10 to 499
— preset	10
Service data
● can be read out	Yes
Ambient conditions
Ambient temperature during operation
● min.	0 °C
● max.	60 °C
Configuration
Configuration software
● STEP 7	Yes; V5.2 SP1 or higher with HW update
Programming
● Command set	see instruction list
● Nesting levels	8
● System functions (SFC)	see instruction list
● System function blocks (SFB)	see instruction list
Programming language
— LAD	Yes
— FBD	Yes
— STL	Yes
— SCL	Yes
— CFC	Yes
— GRAPH	Yes
— HiGraph®	Yes
Know-how protection
● User program protection/password protection	Yes
● Block encryption	Yes; With S7 block Privacy
Dimensions
Width	40 mm
Height	125 mm
Depth	130 mm
Weights
Weight, approx.	280 g

THÔNG SỐ KỸ THUẬT

Tên sản phẩm:	Bộ lập trình S7-300 CPU 314 Siemens 6ES7314-1AG14-0AB0
Mã sản phẩm:	6ES7314-1AG14-0AB0
Xuất xứ:	Đức
Thương hiệu:	Siemens
Nguồn cấp:	24V

CÁC SẢN PHẨM LIÊN QUAN

PLC Omron CJ1W-DA042V

PLC Omron CJ1W-AD04U

PLC Omron CJ1W-AD042

Module ngõ ra Omron CJ1W-OD232