Bộ lọc điều áp kết hợp Festo MSB4-1/4:C4:J5:D13:A1

Bộ lọc điều áp kết hợp Festo MSB4-1/4:C4:J5:D13:A1

• Mô tả: Đây là bộ lọc điều áp kết hợp thuộc dòng MSB4, với cổng kết nối G1/4 (ren 1/4 inch). Mã "C4:J5:D13:A1" chỉ ra cấu hình phức tạp hơn, có thể bao gồm thêm các thành phần như van khởi động mềm hoặc bộ lọc bổ sung.
• Thông số kỹ thuật chính (dựa trên dòng MSB4 tiêu chuẩn):
  • Kích thước: MSB4 (lưới 40 mm).
  • Cổng kết nối: G1/4.
  • Cấp lọc: Thường là 40 μm (có thể tùy chọn).
  • Phạm vi điều chỉnh áp suất: 0,5 đến 12 bar.
  • Áp suất đầu vào tối đa: Lên đến 18 bar.
  • Lưu lượng: Khoảng 1500-2000 l/phút.
  • Nhiệt độ hoạt động: -10°C đến +60°C.
• Cấu hình mã "C4:J5:D13:A1" (giải thích sơ bộ):
  • C4: Van bật/tắt hoặc cấu hình đặc biệt.
  • J5: Bộ điều áp với tính năng bổ sung (có thể là khóa điều chỉnh).
  • D13: Có thể là van khởi động mềm hoặc cấu hình xả khí.
  • A1: Phụ kiện bổ sung (ví dụ: đồng hồ đo áp suất).
• Tính năng:
  • Nhỏ gọn, phù hợp cho các hệ thống khí nén quy mô nhỏ đến trung bình.
  • Đảm bảo khí nén sạch và áp suất ổn định.
• Ứng dụng: Sử dụng trong các ứng dụng công nghiệp nhẹ, như lắp ráp hoặc đóng gói.

Configurable service unit combinations MSB
Overview
3 sizes:
MSB4 – grid dimension 40 mm
MSB6 – grid dimension 62 mm
MSB9 – grid dimension 90 mm
Threaded connections in the
product housing or with connecting
plates
Type of mounting and flow direction
can be optionally selected
Can be configured in accordance
with the ATEX directive for explosive
atmospheres
Food safe (MSB4/MSB6)
-W- www.festo.com
Configurator
The configurator enables step-by-step
configuration of complex service unit
combinations. It is divided into a
basic configuration and the individual
service unit configurations.
The technical parameters for the entire
service unit combination are defined
using the features of the basic configuration. All service unit configurations
define the service unit along with the
general technical conditions.
You can navigate through your configuration using the structure 1. All of
the features available for selection are
stored in drop-down lists 2. Missing
or incomplete information is indicated
by an exclamation mark. Features
shown against a grey background
cannot be selected in the selected
configuration table “Conditions
and exclusion of features”.
If you select a feature shown against a
grey background, red font will indicate
that the configuration is incorrect.
A dynamic graphic 3 and the order
code 4 ( type codes) are created in
accordance with your current
configuration.

Service unit combinations MSB, MS series
Key features
Information
General
The adjacent columns and the
product range overview ( 3) provide
a brief overview of the available service units of a specific size.
You can find the breakdown of the
service unit short code transferred in
the order code for the size
MSB4/MSB6 from page 12 onwards
and for the size MSB9 from page 31
onwards.
You can find detailed information and
all of the technical data in the documentation for the corresponding service unit. To do so, enter the code for
the service unit (e.g. MS6-EE) in the
search window in the product catalogue and select Documentation.

Filter regulator MS4-LFR
Pressure regulator MS4-LR
Pressure regulator for manifold
assembly MS4-LRB
Filter MS4-LF
Fine and micro filter MS4-LFM
Activated carbon filter MS4-LFX
Lubricator MS4-LOE
Manual on-off valve MS4-EM1
Electric on-off valve MS4-EE
Pneumatic soft-start valve MS4-DL
Electric soft-start valve MS4-DE
Membrane air dryer MS4-LDM1
Branching module MS4-FRM

Filter regulator MS6-LFR
Pressure regulator MS6-LR
Pressure regulator for manifold
assembly MS6-LRB
Precision pressure regulator
MS6-LRP
Precision pressure regulator for
manifold assembly MS6-LRPB
Electric pressure regulator MS6-LRE
Filter MS6-LF
Fine and micro filter MS6-LFM
Activated carbon filter MS6-LFX
Water separator MS6-LWS
Lubricator MS6-LOE
Manual on-off valve MS6-EM1
Electric on-off valve MS6-EE
Pneumatic soft-start valve MS6-DL
Electric soft-start valve MS6-DE
Soft-start and exhaust valve
MS6-SV
Membrane air dryer MS6-LDM1
Branching module MS6-FRM
Flow sensor SFAM-62
552938 MSB9 (ISO + NPT)
Filter regulator MS9-LFR
Pressure regulator MS9-LR
Filter MS9-LF
Fine and micro filter MS9-LFM
Activated carbon filter MS9-LFX
Water separator MS9-LWS
Lubricator MS9-LOE
Manual on-off valve MS9-EM
Electric on-off valve MS9-EE
Soft-start and exhaust valve
MS9-SV
Branching module MS9-FRM
Flow sensor SFAM-90
-H- Note
Individual devices with selected
features are available for the configurable service unit combinations
Overview lists.
Further feature options can be
selected via the configurable
individual device.
1) Not available in all markets.
Notes on individual service units and their features
MS-LFR and MS-LF:
Grade of filtration with feature E
(40 μm) or C (5 μm)
MS-LFM:
Grade of filtration with feature B
(1 μm) or A (0.01 μm)
Filter contamination sensor with
feature DA is an optical differential
pressure indicator with red-green
range
Filter contamination sensor with
feature DP is an electric filter contamination indicator with switching
output
MS-LRB/LRPB:
Pressure output is to the rear, the
pressure output is to the front if the
feature Z (alternative flow direction)
is selected
MS-EE and MS-DE:
The supply voltage with feature
10V24 is only permissible up to an
operating voltage of max. 10 bar
With the supply voltages with feature V24/V110/V230 the solenoid
head has a non-detenting/detenting manual override, with feature
10V24 just a non-detenting manual
override

542295 MSB4-¼:C3J1F3M1-WP
8025354 MSB4-¼:C3:J1-WP
8025355 MSB6-½:C3:J1-WP
8042668 MSB4-¼:C3:J120-WP
8042672 MSB6-½:C3:J120-WP
542304 MSB4-¼:C3J3-WP
542298 MSB4-¼:C3J2-WP
542310 MSB4-¼:C3J4-WP
542280 MSB6-½:C3J3-WP
542274 MSB6-½:C3J2-WP
542286 MSB6-½:C3J4-WP
531101 MSB4-¼:J1D1A1-WP
530222 MSB6-½:J1D1A1-WP
530224 MSB6-½:J2D1A1-WP
8025356 MSB4-¼:C3:J1:F12-WP
8025357 MSB6-½:C3:J1:F12-WP
8042667 MSB4-¼:C3:J120:F12-WP
8042671 MSB6-½:C3:J120:F12-WP
542294 MSB4-¼:C3J1F3-WP
542300 MSB4-¼:C3J2F3-WP
542270 MSB6-½:C3J1F3-WP
542276 MSB6-½:C3J2F3-WP
8025358 MSB4-¼:C3:J1:D14-WP
8025359 MSB6-½:C3:J1:D14-WP
8042666 MSB4-¼:C3:J120:D14-WP
8042670 MSB6-½:C3:J120:D14-WP
8025358 MSB4-¼:C3:J1:D14-WP
8025359 MSB6-½:C3:J1:D14-WP
8042666 MSB4-¼:C3:J120:D14-WP
8042670 MSB6-½:C3:J120:D14-WP
6842 U-¼-B
6844 U-½-B
164274 PEV-¼-WD-LED-24
164275 PEV-¼-WD-LED-230
171157 MSSD-C-4P
151687 MSSD-EB
192745 MSSD-EB-S-M14
547268 KMEB-3-24-2,5-LED
547269 KMEB-3-24-5-LED
547270 KMEB-3-24-2,5
547271 KMEB-3-24-5
151688 KMEB-1-24-2,5-LED
151689 KMEB-1-24-5-LED
193457 KMEB-1-24-10-LED
151690 KMEB-1-230AC-2,5
151691 KMEB-1-230AC-5
151717 MEB-LD-12-24DC
“””MSB4 G¼ Manual rotary 40 542293 MSB4-¼:C3J1D1A1F3-WP
Fully automatic 40 542299 MSB4-¼:C3J2D1A1F3-WP
MSB6 G½ Manual rotary 40 542269 MSB6-½:C3J1D1A1F3-WP
5 542281 MSB6-½:C3J3D1A1F3-WP
Fully automatic 40 542275 MSB6-½:C3J2D1A1F3-WP
5 542287 MSB6-½:C3J4D1A1F3-WP””
Size Connection Condensate drain Grade of filtration [μm] Part No. Type
Pressure regulation range 1 … 12 bar, pressure gauge with outer scale in bar and inner scale in psi
MSB4 G¼ Manual rotary 40 542296 MSB4-¼:C3J1M1-WP
MSB6 G½ Manual rotary 40 542272 MSB6-½:C3J1M1-WP
Fully automatic 40 542278 MSB6-½:C3J2M1-WP”